NCS Fluid Handling Systems Industrial Water Treatment

Brad Penner foreman at NCS Fluid Handing Systems proudly operates one of a 3 water treatment sites in remote areas in Norther British Columbia, treating for for heavy metals such as iron, arsenic, hydrocarbons using carbon beds and water treatment. NCS Fluid Handling Systems is a leader of water treatment and filtration services across Canada.

Whether its a 100 GPM or 10000 GPM NCS Fluid Handling Systems group of engineering professionals are ready to serve you. Well over 25 years of relevant and related professional engineering experience makes NCS Fluid Handling Systems one of the more experienced teams in the industry.

NCS Fluid Handling Systems offers solutions combining well-points and heavy metal water treatment systems.

Subsurface dewatering using well-points is achieved by creating a localized drawdown effect in the groundwater table, lowering the water level and allowing access to underground resources. Dewatering operations must be carefully monitored and managed to prevent any negative environmental impacts or violations of local regulations. The use of iron removal systems can help ensure that discharged effluent meets provincial water quality discharge criteria.

Engineers must first identify the area for dewatering and then determine the required number of well-points needed to create the desired drawdown effect. The necessary number of well-points depends on several factors such as depth, width, permeability and volume of groundwater in the area. For example, if a wide area needs to be dried out, more well-points may be required than if it were a smaller area. Once installed, engineers will monitor the pressure at each well-point regularly to adjust and optimize performance as needed.

In addition to monitoring pressure at each well-point, engineers should also consider other factors such as groundwater recharge rate or seasonal variations in precipitation levels which could impact dewatering operations. Dewatering projects should also consider potential changes in land use such as increased development in an area, which could affect groundwater levels over time. These considerations are important when designing an effective subsurface dewatering system that meets both engineering requirements and provincial regulations.

Iron removal systems can be integrated into dewatering projects to meet provincial water quality discharge criteria. Iron removal systems typically involve filtration processes designed to reduce concentrations of suspended particles and other contaminants from wastewater prior to its release back into rivers, lakes or other bodies of water. Depending on their type, these filtration systems may include sedimentation tanks followed by media filters or activated carbon filters for optimal contaminant reduction before discharge into public waterways.

NCS Fluid Handling Systems provides high quality integrated solutions that combine both subsurface dewatering using well-points with iron removal systems to meet stringent provincial regulations while still providing effective solutions for clients’ projects. By combining these processes together in an integrated system design, NCS Fluid Handling Systems can provide cost effective solutions that comply with all applicable regulations while still delivering successful results for their customers’ projects.

This content was written to provide an overview of how subsurface dewatering using well-points works and how iron removal water treatment systems can be integrated by NCS Fluid Handling Systems to meet provincial water quality discharge criteria with additional details about engineering calculations and backup required for successful project implementation as well as greater semantic richness about potential land use changes impacting project success over time. Dewatering is a complex operation but when combined with iron removal systems it can allow engineers to create successful projects compliant with local regulations while also providing cost effective solutions for their customers’ needs.

Call us when your water treatment or pumping needs require a professional touch call NCS Fluid Handling Systems.